• The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc.). If the radio does not have a wired remote input then you will need to use the SWI-X.
• JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
  

Current Revision #: 1.6.20b   Description: Adds Bluetooth support for Kenwood radios & also adds support for Valor & OEM radios

               Revision #: 1.6.16     Description:

• Retains steering wheel control functions when replacing the factory radio
• Works with most Alpine, Kenwood, JVC, Blaupunkt and Clarion radios featuring a wired remote control input
• Retains programming even if the vehicle's battery is disconnected

• Please click here for the SWI-JACK Instruction Manual (rev 1.6.20b ONLY)

  Please click here for the SWI-JACK Instruction Manual (rev 1.6.16 or lower)

  Please click here for vehicle specific wiring instructions

• SWI-JACK Tech Brief - No control with Kenwood radios. This Tech Brief only applies to units that are rev 1.6.16 and were shipped early in the month of March 2009.